Shaping
Push/Pull (P)
Click a face and move: it grows into a solid, or cuts in when you push. Push a window outline right through a wall to make a hole. Type a distance for an exact one.
Move, Rotate, Scale
| Tool | Key | Notes |
|---|---|---|
| Move | M | Option/Ctrl makes a copy; type x5 after for five copies |
| Rotate | Q | click the center, a start direction, then the angle (snaps to 15°) |
| Scale | S | drag a handle; type 2 for twice the size |
| Offset | F | a face’s outline, moved in or out |
| Follow Me | J | sweep a shape along a path: trim, cornices, gutters |
Move a single corner
With nothing selected, Move grabs the corner under the cursor. Its edges stretch as you go, and the faces around it fold so every face stays flat. Good for roofs, ramps and tapered shapes.
Solids and more
Select two solids (closed groups or components) and right-click: Union, Subtract, Intersect, Trim, Split or Outer shell. Also: Intersect Faces, Flip Along, Soften edges, and Bevel in the Design workspace.
Curved and organic shapes
Subdivision smooths a rough cage of faces into a soft shape, the way Blender’s Subdivision modifier does. There are two ways to start one, both in the app:
- SubD box: a cube cage, ready to shape. Library › Smooth shapes (SubD) › SubD box, or right-click empty space › SubD box (or Shift+S, type SubD).
- Subdivide… on something you already modeled: select a group or component, right-click › Subdivide… (or Library › Smooth shapes › Subdivide…). Choose how smooth (1 light, 2 usual, 3 very smooth) and whether sharp edges stay sharp, then Subdivide. A component is made a group first (just that one). Faces with holes can’t be subdivided: split them first.
Either way you land in SubD mode on the object’s cage. Drag points, edges or faces; the smooth surface follows. Tab to shape, Enter when done: Enter leaves SubD mode, and later, select the object and press Tab (or double-click it) to shape it again. Undo takes back the Subdivide in one step.
Inside SubD mode, 1, 2 and 3 pick points, edges or faces; L adds a loop, E extrudes, C creases; Tab switches between the cage and the smooth surface.
Pictures on shapes (projection mapping)
Add a picture in the Materials panel (the + under Textures), select the faces, group or component it should go on, and choose Tools › Project texture… (also in the right-click menu and the command search). A small panel opens beside the model and the picture appears at once:
- Planar shines the picture straight through the selection, like a slide projector (from where you are looking, or from above, the front or the right).
- Box gives every face the flat side of an imaginary box that fits it best: good for crates, dice and walls.
- Cylinder wraps the picture once around, like the label on a can; the ends get it flat.
- Sphere wraps it like a map on a globe.
Size and Turn change it as you watch (on a cylinder or sphere, Turn moves the seam), Fit once makes the picture cover the selection exactly once instead of repeating at its own size, and Axis and center… moves the projection. Apply keeps it (one Undo takes it back), Cancel drops it, Remove projection goes back to the picture’s own placement. The result is saved with the model and goes into glTF, OBJ and Collada exports. A model that uses it is saved so that older SketchCraft versions open it read-only rather than lose it.
Moving a picture on a face (Position Texture)
Right-click a face that has a picture and choose Texture › Position (or Tools › Position texture…). The whole picture appears see-through over the face, with four pins on its corners:
- Red moves the picture. So does dragging the picture itself.
- Green scales and turns it around the red pin.
- Blue stretches or leans its height.
- Yellow skews it.
The face follows as you drag. Press Enter (or click empty space) to keep the result as one Undo step, Esc to take it back. Right-click inside for Flip left/right, Flip up/down, Rotate 90/180/270, Reset and Done. You can still orbit by dragging away from the picture. It works on faces painted with the Paint Bucket, carried on by paint-through or laid by a projection. The yellow pin skews rather than bending the picture in perspective.
Unwrapping a model (the UV editor)
To put a picture exactly where you want it on a whole model, unwrap it. Select the faces (or a group) and choose Tools › UV editor. A window opens with the picture, or a checker, under the outlines of the selected faces’ UVs.
- Mark seams where the surface should be cut, like the seam of a shirt: choose edges in the 3D view (or in the UV window) and press Mark seam. Auto seams marks every hard edge for you. Seams show red in the 3D view.
- Press Unwrap. The model is cut along the seams, each piece is flattened without stretching it, and the pieces (islands) are fitted into the square. A surface that cannot be flattened in one piece, such as a closed sphere with no seams, is cut further for you.
- Click an island to select it, and its faces in the 3D view. Drag it, or press G to move, R to turn and S to scale (click to keep, Esc to cancel); the arrow keys nudge. 1 / 2 / 3 switch between points, edges and islands. Pin (P) holds points in place so the next Unwrap leaves them where they are. Pack fits the islands in again after you move things. Every change is one Undo step.
- Turn on Checker to see how the picture stretches, on the model too.
Lightmap UVs makes a second set for baked light: no overlaps, packed into the square. It is not shown on the model;
glTF / GLB (as TEXCOORD_1) and FBX (a second UV layer) carry it, so Blender, Unity and Unreal can bake into it.
Terrain
The Sandbox tools shape ground: Smoove raises and lowers it, Stamp presses in a flat pad for a building, Drape lays lines onto it, and Flip edge fixes a triangle. Add location… brings in real terrain and map imagery.
Model from photos
Match two photos of the same building, mark the same corners in both, and SketchCraft works out where they are in 3D. Views › Match photo…, then Model from photos…
Next: Organizing
Something wrong or missing? Tell us.