SketchCraft
Help topics

Files

Your models

File › Save writes a .sketchcraft file. SketchCraft also keeps a live copy as you work, so a crash doesn’t lose your model.

Files from a newer SketchCraft

Every .sketchcraft file says which version of the file format it uses. If you open a file saved by a newer SketchCraft (for example on a computer that updated before this one), this version can’t know everything in it, and saving would quietly throw away what it doesn’t know. So the file opens read-only, and a bar across the top says: “Saved by a newer SketchCraft — update to edit. You can look, but changes won’t be saved here.” Files from a newer SketchCraft open read-only, so an older copy can never damage them.

While it is read-only:

  • You can orbit, measure, render and export as usual.
  • Drawing, editing, Undo, Save and Save As are refused, the file on disk is never written to, and the live copy and the timed backups leave it alone.
  • AI agents and plugins get an error that says why, instead of a silent no.
  • Restore from backup… won’t put anything over it, and a backup that is itself from a newer SketchCraft can’t be restored by this version. Save a copy in that list still works: it copies the file byte for byte, so nothing is lost.
  • A part from a newer SketchCraft can’t be placed in a model from the library.
  • File › New or File › Open… of another model ends it. To edit the file, update SketchCraft. There is no “Save a copy” of the open model itself: the copy would have to be made from what this version understood, which is the thing that loses data. Copy the file in Finder if you want a spare.

Files from before this check (with no version in them) open and save as always.

Restoring an earlier version

SketchCraft keeps earlier copies of your model in a Backups folder beside it: one every few minutes while you work (older ones are thinned to about one an hour, then one a day), and an extra one just before anything that removes a lot: New, Open, a big delete, or a plugin run that wiped much of the model.

File › Restore from backup… (or Shift+S, type “restore”) lists them, newest first, with the time, the size and what the copy was taken before (“before New”, “before a big shrink”, “before a plugin run”). For each one:

  • Restore puts that version in place as one step. Undo (⌘Z) takes the restore back, and the model it replaced is kept as a backup first, so you can’t lose anything by trying.
  • Save a copy leaves your model alone and puts that version in a Restored folder beside it, so you can open it with File › Open… and compare.

The same list shows work SketchCraft set aside for you: a .unsaved- file (your changes, kept when another program saved over the model while a plugin was running or your own save was failing) and a .damaged- file (a copy of a model file that couldn’t be read). Restoring from those works the same way. SketchCraft never deletes these without telling you.

Backups made because an AI agent or a plugin did something big are kept in their own small share (at most ten each, for a week), so they can’t push out your own. Your own keep one copy per hour for a day and one per day for a month, however many deletes you make. A restore reads files up to 768 MB, and it works on a model over the size limits too (it opens for cutting down, see below). If the model file can’t be read when SketchCraft starts, nothing is saved over it until you choose: File › Restore from backup… lists the copy that was set aside, and File › New or File › Open starts over. A set-aside file whose note was lost is still listed, marked “not verified”.

If two programs edit the same model (for example Claude over MCP), Undo takes back only your last step, never the other program’s work. If the other program has since changed or built on the same objects (or something the step would remove, such as a colour or group, is now used by the other program), Undo says so and keeps that step: try again after the other program takes its change back, or press Undo again to skip the step and go one further back. Nothing is guessed.

Models that are too big

A model can hold about two million points, edges and faces, and its file may be about 512 MB in all (everything counts: images, photos, scans, names, notes and component attributes; a scan is roughly 16 bytes a point, so about 30 million). An AI agent or a plugin can take a model up to 160 MB and add 32 MB in one command; only you can go past that. A bigger model (an enormous import, or one made before these limits) still opens, for looking at and for cutting down; it can’t be saved over your file until it is under the limits, and the file on disk isn’t touched meanwhile. To cut it down, delete geometry or placements, and in the Materials panel (Textures) delete or replace the pictures that take the most room (each shows its size) or choose Remove unused materials. Names and notes may add up to 64 MB (an AI agent or a plugin may take that no further than 2 MB, so your own naming always has room). A model that SketchCraft saved always opens again. Over about a million points, edges and faces everything still works, but each change takes a second or more to save and the view takes a few seconds to redraw.

Pictures (textures, photos on a view) go up to 16,384 pixels on a side and 100 million pixels (a 48 megapixel phone photo and an 8K texture are fine). A bigger picture is not taken, and when one is left out of a render, an import or a file you open, the message says which one and why.

Opening other formats

File › Open… or Import… (⌘I):

Format From Notes
.skp SketchUp 6 to 8 and 2013 onward geometry, groups, components, colors and textures
.dwg, .dxf AutoCAD and most CAD apps DXF works on its own. DWG needs a free helper (below)
.ifc Revit, ArchiCAD and other BIM apps needs a free helper (below). Each element becomes a group, tagged by storey
.fbx, .obj Blender, game and 3D apps
.ply, .las, .xyz, .pts 3D scans point clouds in color; drawing tools snap to scan points

The DWG and IFC helpers

  • DWG: install LibreDWG (on a Mac: brew install libredwg) or the free ODA File Converter. SketchCraft finds either one.
  • IFC: SketchCraft uses IfcOpenShell. Open an IFC file without it and SketchCraft shows the exact commands to set it up.

From a floor plan to walls

Import a 2D floor plan (DWG or DXF), right-click it and choose Raise walls: the walls go up, with openings where the windows are.

Exporting

File › Export ▸: glTF (.glb), FBX (.fbx), OBJ, STL (for 3D printing), Collada (.dae), 3D DXF, DWG, IFC, a PDF or PNG of the view, a scene tour (MP4), and section cuts (SVG, DXF). Also on the File menu: Make blueprint (PDF), Drawing sheets (PDF) at true scale, and Generate report (CSV).

FBX is for game engines and 3D tools (Unity, Unreal, Blender, Maya). Every group and component becomes its own object, nested the way it is nested in your model and keeping its name. Faces come out as triangles with normals, texture coordinates and materials (colour, finish). Pictures used as textures are saved beside the file in a <name>_textures folder and linked by a relative path, so keep the two together. Units are metres and Y is up. It is binary FBX (7.4); agents can ask for the text version with binary: false (Blender doesn’t open text FBX).

Next: Presenting

Something wrong or missing? Tell us.