SketchCraft

Security fixes

Every security fix that has shipped in SketchCraft, listed by release and by the part of the app it protects.

SketchCraft has been through repeated outside security reviews. Everything below has already shipped: update the app (it offers the update when you open it) and you have it. Found something? Please report it privately, as SECURITY.md describes, rather than in a public issue.

By release

SketchCraft 0.3.9

15 fixes from 5 review rounds, all shipped in this release.

  • Saving, backups and undo · WildLeopard review of 0.3.9

    UV and texture commands refuse numbers that aren’t real numbers, so a model you save always opens again.
  • Saving, backups and undo · WildLeopard review of 0.3.9

    The texture, UV and vertex colour data on each face counts toward the model’s size, growth and undo limits.
  • Opening and importing files · WildLeopard review of 0.3.9

    Each stroke has a work budget, and painting keeps to the 4,096-pixel picture limit; starting a paint texture no longer decodes every picture in the model.
  • Size and time limits · WildLeopard review of 0.3.9

    Packing UVs, painting across faces, vertex paint and joining many points in one spot all have limits, so a very big model or a hostile command can’t freeze the app.
  • Size and time limits · WildLeopard review of 0.3.9

    Soften and edge style on a list of faces no longer slow down sharply on big models.
  • Exports and reports · WildLeopard review of 0.3.9

    Texture files written beside an export can’t overwrite each other after their names are cleaned.

SketchCraft 0.3.8

10 fixes from one review, all shipped in this release.

  • Plugins · WildLeopard review of 0.3.8

    A table made by an agent or a plugin keeps to the same size limits as one you draw, sheet data in a model file is checked when the file opens, and the number of viewports on a sheet is limited.
  • AI agents and MCP · WildLeopard review of 0.3.8

    Text that comes from an opened file, such as names and labels, is marked as data in an agent’s replies, so a hostile file can’t pass itself off as instructions.
  • Saving, backups and undo · WildLeopard review of 0.3.8

    Picture and drawing sizes are checked before memory is set aside for them.
  • Opening and importing files · WildLeopard review of 0.3.8

    DXF and SVG files keep imported text as plain text.
  • Size and time limits · WildLeopard review of 0.3.8

    Batches of commands stop cleanly at their limits.

SketchCraft 0.3.6

100+ fixes from 8 review rounds, all shipped in this release.

  • Plugins · WildLeopard review of 0.3.6

    The plugin install preview shows the same kind (JavaScript or Ruby) and Ruby menu items that the installer uses, and a plugin that is both is refused.
  • Plugins · WildLeopard review of 0.3.6

    Plugins (JavaScript and SketchUp Ruby) and AI agents are held to modeling commands, the plugin sandbox is tighter, installing a plugin shows what it is first, MCP agents work inside one folder, and the dev bridge needs a token.
  • Plugins · WildLeopard review of 0.3.6

    A plugin run is now one Undo step.
  • Plugins · WildLeopard review of 0.3.6

    Plugin messages say which plugin they come from, and saved CSVs can’t carry spreadsheet formulas.
  • Plugins · WildLeopard review of 0.3.6

    A plugin run is never re-pointed at someone else’s model mid-run, and a run that is never closed is saved after a couple of minutes.
  • Plugins · WildLeopard review of 0.3.6

    AI agents can’t write into Backups or Plugins through the library, and can’t replace library or export files that already exist.
  • Plugins · WildLeopard review of 0.3.6

    The report CSV can’t carry formulas, plugin tool previews can’t crash the window, and a long Ruby script has a time limit.
  • Plugins · WildLeopard review of 0.3.6

    A plugin run is closed on time even if the app is idle, and your own edits during a run are saved at once.
  • Plugins · WildLeopard review of 0.3.6

    A plugin tool that can’t start now says so, and one that sends too many commands is stopped.
  • Plugins · WildLeopard review of 0.3.6

    Escape closes the Learn, Themes, Plugins and every other dialog, and the File and right-click menus.
  • AI agents and MCP · WildLeopard review of 0.3.6

    Agents can no longer start programs (animate, IFC and DWG are yours alone), every helper program has a time limit and is stopped with everything it started, --any-path keeps the Backups, Plugins and hidden-file rules, and long or odd names in an agent’s replies are cut and marked as data.
  • AI agents and MCP · WildLeopard review of 0.3.6

    AI agents write only the right kind of file with a new name (never over yours) and can’t be steered out of their folder by an OBJ file.
  • AI agents and MCP · WildLeopard review of 0.3.6

    AI agents can no longer start the map and terrain download (Add location…); it stays yours.
  • AI agents and MCP · WildLeopard review of 0.3.6

    A model with a very long text pool (hundreds of thousands of named placements) opens for cutting down instead of being refused, and an AI agent can no longer use up the room your own names, notes and colours need.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    A plugin run that changes your model now says so (“Plugin X changed 3 things”, with an Undo button), the Undo and Redo buttons say when the step is from a plugin, and when you open SketchCraft after an AI agent saved changes you’re told.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    It’s saved atomically with rolling backups, a file that can’t be read is kept aside instead of replaced, and a bad command can no longer corrupt it.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Undo no longer steps back over work another client (Claude, a second window) saved, and a burst of New/Open can’t push your last good backup out (backups are thinned instead of dropped, blank ones are skipped).
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Only SketchCraft’s own backups are counted, the newest of each time slot is kept, the copy taken just before a New, Open or big delete is kept for a day, and another model in the same folder can’t thin yours.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    If another program saves while a plugin runs, or while your own save was failing, your changes are set aside in a .unsaved- file next to the model (with a warning that stays until you deal with it) instead of being lost.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Backups can no longer be pushed out: forced backups are paced, your backups, an agent’s and a plugin’s each have their own small quota (with a byte limit too), a plugin run that wipes the model is backed up first, and the files set aside next to your model are only removed with a notice.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Folder names such as Backupſ or BACKUP~1 can’t reach Backups or Plugins (they are compared by what they are on disk, not by spelling), and a name an agent has made is only “its own” while the file is still exactly what it wrote.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Undo after another program saved now works on ordinary models (it used to refuse most of the time once you had rotated, scaled or imported anything), carries your history across a save without a pause even on huge models, and keeps a step it had to refuse so it can be tried again (press Undo again to skip it).
  • Saving, backups and undo · WildLeopard review of 0.3.6

    It also refuses an undo that would leave another program’s work pointing at a colour, group or part that the undo removed.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Restore no longer reuses part numbers and refuses a damaged backup.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Backups keep one copy per hour for a day and per day for a month however many deletes you make, a few huge backups can’t push out all the others, and Restore lists only the set-aside files SketchCraft itself made.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Models over the limits (made before this, or restored from a backup) now open for cutting down instead of being refused with a message you can’t act on, and Restore is never blocked by the limit.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    If your model file can’t be read when SketchCraft starts, nothing is saved over it until you restore a copy or start a new model.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Undo no longer lets a few millimetres of another program’s edit be overwritten at survey-sized coordinates, and a Redo step survives a second save by another program.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    A recovery file whose note was lost is still listed in Restore (“not verified”).
  • Saving, backups and undo · WildLeopard review of 0.3.6

    The file-size estimate counts escaped text, so a model SketchCraft saved always reopens.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    If SketchCraft can’t read your file at start, saving comes back by itself when the file can be read again or is moved, or when you choose New or Open.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    A SketchUp file (or a saved model, or a library part) whose components contain themselves, nest more than 64 levels deep or multiply into millions of faces (a part placed 10 times inside a part placed 10 times, and so on) used to crash the app, and could crash it again on every start.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    They are now refused with a message, and a saved model like that is set aside like any damaged file instead of crashing the program on launch.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    A saved setting that has gone bad can no longer stop the app starting.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Placing a component while you are editing one says “Close the component you’re editing first” and leaves Place mode.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    Another program that opens your model while you are editing a group no longer draws into that group, which could make Undo refuse to take back your own step.
  • Saving, backups and undo · WildLeopard review of 0.3.6

    File > New while editing a component now really starts a new model.
  • Opening and importing files · WildLeopard review of 0.3.6

    A model no longer records the folder a library part came from (older files lose it when opened), built-in doors, windows and figures can’t be swapped by a component with the same name, and a library part is reused only if it is the same file contents.
  • Opening and importing files · WildLeopard review of 0.3.6

    Opening a huge or booby-trapped DXF is refused quickly instead of freezing the app, and very long point lists or absurd stair/array counts are refused.
  • Opening and importing files · WildLeopard review of 0.3.6

    DXF wall layers and hatches, and 3D text, now stop at their time limit.
  • Opening and importing files · WildLeopard review of 0.3.6

    Images, photos and scans count against a size limit (256 MB in a model), so a runaway tool can’t make the model unopenable or push your backups out; your own big imports (a 215,000-triangle OBJ, a 354,000-line DXF, a 300 x 300 terrain) work again.
  • Opening and importing files · WildLeopard review of 0.3.6

    A model SketchCraft saved always opens again (the open limit is 768 MB).
  • Opening and importing files · WildLeopard review of 0.3.6

    Opening a file (or a library part) whose part numbers were wrong no longer overwrites your drawing, and components are checked as thoroughly as the model.
  • Opening and importing files · WildLeopard review of 0.3.6

    Huge pictures hidden in a small file are measured before they are opened, library thumbnails check the file size, and a face squashed to nothing can no longer stop the model drawing.
  • Opening and importing files · WildLeopard review of 0.3.6

    Models with parts inside parts (most SketchUp imports and library parts) open, restore and reload again: the sixth review’s consistency check wrongly refused them.
  • Opening and importing files · WildLeopard review of 0.3.6

    An agent’s open and library reads have their own smaller size limits, and a large import now shows the big-model notice straight away.
  • Opening and importing files · WildLeopard review of 0.3.6

    Components can’t be made, and SketchUp files can’t be imported, while you are editing a component (close it first); that also fixes a bug where such an import could make a component contain itself.
  • Opening and importing files · WildLeopard review of 0.3.6

    Opening a SketchUp 2021+ file is held to limits (archive size, pictures and time, at most 30 seconds for any file), so a tiny booby-trapped file can’t use up the computer’s memory or freeze the app.
  • Opening and importing files · WildLeopard review of 0.3.6

    Double-click now works everywhere (it did nothing in Windows and in browser builds): double-click finishes a wall, opens a group or component, selects a face with its edges (triple-click: everything connected), and repeats your last Push/Pull distance.
  • Opening and importing files · WildLeopard review of 0.3.6

    A damaged classic SketchUp file (2020 and earlier) is now refused in well under a second instead of freezing the app for up to 30 seconds.
  • Opening and importing files · WildLeopard review of 0.3.6

    Pictures in a SketchUp file that can’t be read, or are over 64 MB, are named in the import notice.
  • Size and time limits · WildLeopard review of 0.3.6

    Huge copies and arrays, dense DXF drawings, text with many outlines and grouping part of a big mesh are bounded or fast instead of freezing the app.
  • Size and time limits · WildLeopard review of 0.3.6

    A model can hold about 2 million points, edges and faces (was 8 million); a bigger one opens for viewing and cutting down instead of being refused.
  • Size and time limits · WildLeopard review of 0.3.6

    One size limit now counts everything in a model (images, scans, names, notes, component attributes): about 512 MB of file, of which an AI agent or a plugin can take a model up to 160 MB, and no more than 32 MB at a time, so a runaway tool can no longer make your model unopenable.
  • Size and time limits · WildLeopard review of 0.3.6

    Very large models (over a million points, edges and faces) say so: each change takes a second or more.
  • Size and time limits · WildLeopard review of 0.3.6

    Formulas in Dynamic Components are worked out once each (a long chain no longer hangs the app), and an id counter at the top of its range is refused instead of overwriting your drawing.
  • Updates and releases · WildLeopard review of 0.3.6

    The Rust version is pinned (CI is green again on newer Rust), each platform’s installers are checked for their own names and file types before signing, only the Tauri CLI is installed next to the signing key, release files get build-provenance attestations, and a vendored Opal’s unused network loader is removed.
  • Updates and releases · WildLeopard review of 0.3.6

    CI also checks that dependencies come from public registries only and that what ships has no high npm advisory.
  • Updates and releases · WildLeopard review of 0.3.6

    Updates and releases are checked more strictly, and releases publish SHA-256 checksums.
  • Updates and releases · WildLeopard review of 0.3.6

    The release workflow keeps the Apple secrets out of the job that compiles, and checks the file names it signs.
  • Updates and releases · WildLeopard review of 0.3.6

    Plugins can no longer use Undo and Redo; the release workflow asks the release reviewer before the Apple signing secrets can be read.
  • Dev bridge · WildLeopard review of 0.3.6

    The plugin warning banner stays readable under any theme, a remembered Save path must end in .sketchcraft, the dev bridge deletes its token file when it stops, and the committed MCP setup holds no personal folder.

SketchCraft 0.3.0

  • Dev bridge

    The dev bridge refuses other websites and DNS rebinding; a strict content security policy; importers fuzzed (no crashes in 20,000-file runs); dependencies updated (cargo audit: no vulnerabilities).
  • Dev bridge

No security changes in 0.3.7, 0.3.5, 0.3.4, 0.3.3, 0.3.2, 0.3.1 or 0.2.0.

By part of the app

Plugins

JavaScript and SketchUp Ruby plugins, the sandbox they run in, and what installing one shows you.

  • 0.3.8 · WildLeopard review of 0.3.8

    A table made by an agent or a plugin keeps to the same size limits as one you draw, sheet data in a model file is checked when the file opens, and the number of viewports on a sheet is limited.
  • 0.3.6 · WildLeopard review of 0.3.6

    The plugin install preview shows the same kind (JavaScript or Ruby) and Ruby menu items that the installer uses, and a plugin that is both is refused.
  • 0.3.6 · WildLeopard review of 0.3.6

    Plugins (JavaScript and SketchUp Ruby) and AI agents are held to modeling commands, the plugin sandbox is tighter, installing a plugin shows what it is first, MCP agents work inside one folder, and the dev bridge needs a token.
  • 0.3.6 · WildLeopard review of 0.3.6

    A plugin run is now one Undo step.
  • 0.3.6 · WildLeopard review of 0.3.6

    Plugin messages say which plugin they come from, and saved CSVs can’t carry spreadsheet formulas.
  • 0.3.6 · WildLeopard review of 0.3.6

    A plugin run is never re-pointed at someone else’s model mid-run, and a run that is never closed is saved after a couple of minutes.
  • 0.3.6 · WildLeopard review of 0.3.6

    AI agents can’t write into Backups or Plugins through the library, and can’t replace library or export files that already exist.
  • 0.3.6 · WildLeopard review of 0.3.6

    The report CSV can’t carry formulas, plugin tool previews can’t crash the window, and a long Ruby script has a time limit.
  • 0.3.6 · WildLeopard review of 0.3.6

    A plugin run is closed on time even if the app is idle, and your own edits during a run are saved at once.
  • 0.3.6 · WildLeopard review of 0.3.6

    A plugin tool that can’t start now says so, and one that sends too many commands is stopped.
  • 0.3.6 · WildLeopard review of 0.3.6

    Escape closes the Learn, Themes, Plugins and every other dialog, and the File and right-click menus.

AI agents and MCP

What an AI agent connected over MCP can and can't do to your models and your computer.

  • 0.3.8 · WildLeopard review of 0.3.8

    Text that comes from an opened file, such as names and labels, is marked as data in an agent’s replies, so a hostile file can’t pass itself off as instructions.
  • 0.3.6 · WildLeopard review of 0.3.6

    Agents can no longer start programs (animate, IFC and DWG are yours alone), every helper program has a time limit and is stopped with everything it started, --any-path keeps the Backups, Plugins and hidden-file rules, and long or odd names in an agent’s replies are cut and marked as data.
  • 0.3.6 · WildLeopard review of 0.3.6

    AI agents write only the right kind of file with a new name (never over yours) and can’t be steered out of their folder by an OBJ file.
  • 0.3.6 · WildLeopard review of 0.3.6

    AI agents can no longer start the map and terrain download (Add location…); it stays yours.
  • 0.3.6 · WildLeopard review of 0.3.6

    A model with a very long text pool (hundreds of thousands of named placements) opens for cutting down instead of being refused, and an AI agent can no longer use up the room your own names, notes and colours need.

Saving, backups and undo

Keeping your model safe: atomic saves, backups, recovery files, and undo when another program saved.

  • 0.3.9 · WildLeopard review of 0.3.9

    UV and texture commands refuse numbers that aren’t real numbers, so a model you save always opens again.
  • 0.3.9 · WildLeopard review of 0.3.9

    The texture, UV and vertex colour data on each face counts toward the model’s size, growth and undo limits.
  • 0.3.8 · WildLeopard review of 0.3.8

    Picture and drawing sizes are checked before memory is set aside for them.
  • 0.3.6 · WildLeopard review of 0.3.6

    A plugin run that changes your model now says so (“Plugin X changed 3 things”, with an Undo button), the Undo and Redo buttons say when the step is from a plugin, and when you open SketchCraft after an AI agent saved changes you’re told.
  • 0.3.6 · WildLeopard review of 0.3.6

    It’s saved atomically with rolling backups, a file that can’t be read is kept aside instead of replaced, and a bad command can no longer corrupt it.
  • 0.3.6 · WildLeopard review of 0.3.6

    Undo no longer steps back over work another client (Claude, a second window) saved, and a burst of New/Open can’t push your last good backup out (backups are thinned instead of dropped, blank ones are skipped).
  • 0.3.6 · WildLeopard review of 0.3.6

    Only SketchCraft’s own backups are counted, the newest of each time slot is kept, the copy taken just before a New, Open or big delete is kept for a day, and another model in the same folder can’t thin yours.
  • 0.3.6 · WildLeopard review of 0.3.6

    If another program saves while a plugin runs, or while your own save was failing, your changes are set aside in a .unsaved- file next to the model (with a warning that stays until you deal with it) instead of being lost.
  • 0.3.6 · WildLeopard review of 0.3.6

    Backups can no longer be pushed out: forced backups are paced, your backups, an agent’s and a plugin’s each have their own small quota (with a byte limit too), a plugin run that wipes the model is backed up first, and the files set aside next to your model are only removed with a notice.
  • 0.3.6 · WildLeopard review of 0.3.6

    Folder names such as Backupſ or BACKUP~1 can’t reach Backups or Plugins (they are compared by what they are on disk, not by spelling), and a name an agent has made is only “its own” while the file is still exactly what it wrote.
  • 0.3.6 · WildLeopard review of 0.3.6

    Undo after another program saved now works on ordinary models (it used to refuse most of the time once you had rotated, scaled or imported anything), carries your history across a save without a pause even on huge models, and keeps a step it had to refuse so it can be tried again (press Undo again to skip it).
  • 0.3.6 · WildLeopard review of 0.3.6

    It also refuses an undo that would leave another program’s work pointing at a colour, group or part that the undo removed.
  • 0.3.6 · WildLeopard review of 0.3.6

    Restore no longer reuses part numbers and refuses a damaged backup.
  • 0.3.6 · WildLeopard review of 0.3.6

    Backups keep one copy per hour for a day and per day for a month however many deletes you make, a few huge backups can’t push out all the others, and Restore lists only the set-aside files SketchCraft itself made.
  • 0.3.6 · WildLeopard review of 0.3.6

    Models over the limits (made before this, or restored from a backup) now open for cutting down instead of being refused with a message you can’t act on, and Restore is never blocked by the limit.
  • 0.3.6 · WildLeopard review of 0.3.6

    If your model file can’t be read when SketchCraft starts, nothing is saved over it until you restore a copy or start a new model.
  • 0.3.6 · WildLeopard review of 0.3.6

    Undo no longer lets a few millimetres of another program’s edit be overwritten at survey-sized coordinates, and a Redo step survives a second save by another program.
  • 0.3.6 · WildLeopard review of 0.3.6

    A recovery file whose note was lost is still listed in Restore (“not verified”).
  • 0.3.6 · WildLeopard review of 0.3.6

    The file-size estimate counts escaped text, so a model SketchCraft saved always reopens.
  • 0.3.6 · WildLeopard review of 0.3.6

    If SketchCraft can’t read your file at start, saving comes back by itself when the file can be read again or is moved, or when you choose New or Open.
  • 0.3.6 · WildLeopard review of 0.3.6

    A SketchUp file (or a saved model, or a library part) whose components contain themselves, nest more than 64 levels deep or multiply into millions of faces (a part placed 10 times inside a part placed 10 times, and so on) used to crash the app, and could crash it again on every start.
  • 0.3.6 · WildLeopard review of 0.3.6

    They are now refused with a message, and a saved model like that is set aside like any damaged file instead of crashing the program on launch.
  • 0.3.6 · WildLeopard review of 0.3.6

    A saved setting that has gone bad can no longer stop the app starting.
  • 0.3.6 · WildLeopard review of 0.3.6

    Placing a component while you are editing one says “Close the component you’re editing first” and leaves Place mode.
  • 0.3.6 · WildLeopard review of 0.3.6

    Another program that opens your model while you are editing a group no longer draws into that group, which could make Undo refuse to take back your own step.
  • 0.3.6 · WildLeopard review of 0.3.6

    File > New while editing a component now really starts a new model.

Opening and importing files

SketchUp, DXF, DWG, IFC, OBJ and image files that are damaged, huge or built to cause trouble.

  • 0.3.9 · WildLeopard review of 0.3.9

    Each stroke has a work budget, and painting keeps to the 4,096-pixel picture limit; starting a paint texture no longer decodes every picture in the model.
  • 0.3.8 · WildLeopard review of 0.3.8

    DXF and SVG files keep imported text as plain text.
  • 0.3.6 · WildLeopard review of 0.3.6

    A model no longer records the folder a library part came from (older files lose it when opened), built-in doors, windows and figures can’t be swapped by a component with the same name, and a library part is reused only if it is the same file contents.
  • 0.3.6 · WildLeopard review of 0.3.6

    Opening a huge or booby-trapped DXF is refused quickly instead of freezing the app, and very long point lists or absurd stair/array counts are refused.
  • 0.3.6 · WildLeopard review of 0.3.6

    DXF wall layers and hatches, and 3D text, now stop at their time limit.
  • 0.3.6 · WildLeopard review of 0.3.6

    Images, photos and scans count against a size limit (256 MB in a model), so a runaway tool can’t make the model unopenable or push your backups out; your own big imports (a 215,000-triangle OBJ, a 354,000-line DXF, a 300 x 300 terrain) work again.
  • 0.3.6 · WildLeopard review of 0.3.6

    A model SketchCraft saved always opens again (the open limit is 768 MB).
  • 0.3.6 · WildLeopard review of 0.3.6

    Opening a file (or a library part) whose part numbers were wrong no longer overwrites your drawing, and components are checked as thoroughly as the model.
  • 0.3.6 · WildLeopard review of 0.3.6

    Huge pictures hidden in a small file are measured before they are opened, library thumbnails check the file size, and a face squashed to nothing can no longer stop the model drawing.
  • 0.3.6 · WildLeopard review of 0.3.6

    Models with parts inside parts (most SketchUp imports and library parts) open, restore and reload again: the sixth review’s consistency check wrongly refused them.
  • 0.3.6 · WildLeopard review of 0.3.6

    An agent’s open and library reads have their own smaller size limits, and a large import now shows the big-model notice straight away.
  • 0.3.6 · WildLeopard review of 0.3.6

    Components can’t be made, and SketchUp files can’t be imported, while you are editing a component (close it first); that also fixes a bug where such an import could make a component contain itself.
  • 0.3.6 · WildLeopard review of 0.3.6

    Opening a SketchUp 2021+ file is held to limits (archive size, pictures and time, at most 30 seconds for any file), so a tiny booby-trapped file can’t use up the computer’s memory or freeze the app.
  • 0.3.6 · WildLeopard review of 0.3.6

    Double-click now works everywhere (it did nothing in Windows and in browser builds): double-click finishes a wall, opens a group or component, selects a face with its edges (triple-click: everything connected), and repeats your last Push/Pull distance.
  • 0.3.6 · WildLeopard review of 0.3.6

    A damaged classic SketchUp file (2020 and earlier) is now refused in well under a second instead of freezing the app for up to 30 seconds.
  • 0.3.6 · WildLeopard review of 0.3.6

    Pictures in a SketchUp file that can’t be read, or are over 64 MB, are named in the import notice.

Size and time limits

Limits that stop a runaway model, tool or file from freezing the app or filling your disk.

  • 0.3.9 · WildLeopard review of 0.3.9

    Packing UVs, painting across faces, vertex paint and joining many points in one spot all have limits, so a very big model or a hostile command can’t freeze the app.
  • 0.3.9 · WildLeopard review of 0.3.9

    Soften and edge style on a list of faces no longer slow down sharply on big models.
  • 0.3.8 · WildLeopard review of 0.3.8

    Batches of commands stop cleanly at their limits.
  • 0.3.6 · WildLeopard review of 0.3.6

    Huge copies and arrays, dense DXF drawings, text with many outlines and grouping part of a big mesh are bounded or fast instead of freezing the app.
  • 0.3.6 · WildLeopard review of 0.3.6

    A model can hold about 2 million points, edges and faces (was 8 million); a bigger one opens for viewing and cutting down instead of being refused.
  • 0.3.6 · WildLeopard review of 0.3.6

    One size limit now counts everything in a model (images, scans, names, notes, component attributes): about 512 MB of file, of which an AI agent or a plugin can take a model up to 160 MB, and no more than 32 MB at a time, so a runaway tool can no longer make your model unopenable.
  • 0.3.6 · WildLeopard review of 0.3.6

    Very large models (over a million points, edges and faces) say so: each change takes a second or more.
  • 0.3.6 · WildLeopard review of 0.3.6

    Formulas in Dynamic Components are worked out once each (a long chain no longer hangs the app), and an id counter at the top of its range is refused instead of overwriting your drawing.

Exports and reports

Files SketchCraft writes for other programs, such as CSV reports.

  • 0.3.9 · WildLeopard review of 0.3.9

    Texture files written beside an export can’t overwrite each other after their names are cleaned.

Updates and releases

How releases are built, signed and checked, and how the app updates itself.

  • 0.3.6 · WildLeopard review of 0.3.6

    The Rust version is pinned (CI is green again on newer Rust), each platform’s installers are checked for their own names and file types before signing, only the Tauri CLI is installed next to the signing key, release files get build-provenance attestations, and a vendored Opal’s unused network loader is removed.
  • 0.3.6 · WildLeopard review of 0.3.6

    CI also checks that dependencies come from public registries only and that what ships has no high npm advisory.
  • 0.3.6 · WildLeopard review of 0.3.6

    Updates and releases are checked more strictly, and releases publish SHA-256 checksums.
  • 0.3.6 · WildLeopard review of 0.3.6

    The release workflow keeps the Apple secrets out of the job that compiles, and checks the file names it signs.
  • 0.3.6 · WildLeopard review of 0.3.6

    Plugins can no longer use Undo and Redo; the release workflow asks the release reviewer before the Apple signing secrets can be read.

Dev bridge

The local server that lets the app's interface run in a browser during development.

  • 0.3.6 · WildLeopard review of 0.3.6

    The plugin warning banner stays readable under any theme, a remembered Save path must end in .sketchcraft, the dev bridge deletes its token file when it stops, and the committed MCP setup holds no personal folder.
  • 0.3.0

    The dev bridge refuses other websites and DNS rebinding; a strict content security policy; importers fuzzed (no crashes in 20,000-file runs); dependencies updated (cargo audit: no vulnerabilities).
  • 0.3.0