Fixed
- SketchUp files from every version open. Files saved by SketchUp 2013 to 2020 were refused (“not a SketchUp 2013+ archive”); they now import with their geometry, components and colours. Files from SketchUp 2021 and later (including SketchUp 27 and SketchUp for Web) now place all their components; some came in looking empty. Tested on SketchUp’s own test models from versions 6 to 27, and on hundreds of damaged files, which are refused in under a second. (Textures in 2017-2020 files come in as colours for now; that’s planned for 0.3.8.) (#1)
- The window drags by its title bar while it’s focused on macOS. Before, it only moved when another window was in front. (#2)
- Push/Pull repeat (double-click a face to push it the same distance again) never worked; it does now.
Security
-
WildLeopard review of 0.3.6.
- Plugins and agents: a plugin run that changes your model now says so
(“Plugin X changed 3 things”, with an Undo button), the Undo and Redo buttons
say when the step is from a plugin, and when you open SketchCraft after an AI
agent saved changes you’re told. The plugin install preview shows the same
kind (JavaScript or Ruby) and Ruby menu items that the installer uses, and a
plugin that is both is refused. Agents can no longer start programs (animate, IFC and DWG are
yours alone), every helper program has a time limit and is stopped with
everything it started,
--any-pathkeeps the Backups, Plugins and hidden-file rules, and long or odd names in an agent’s replies are cut and marked as data. - Your files: a model no longer records the folder a library part came from (older files lose it when opened), built-in doors, windows and figures can’t be swapped by a component with the same name, and a library part is reused only if it is the same file contents.
- Releases: the Rust version is pinned (CI is green again on newer Rust), each platform’s installers are checked for their own names and file types before signing, only the Tauri CLI is installed next to the signing key, release files get build-provenance attestations, and a vendored Opal’s unused network loader is removed. CI also checks that dependencies come from public registries only and that what ships has no high npm advisory.
- Smaller: the plugin warning banner stays readable under any theme, a
remembered Save path must end in
.sketchcraft, the dev bridge deletes its token file when it stops, and the committed MCP setup holds no personal folder.
- Plugins and agents: a plugin run that changes your model now says so
(“Plugin X changed 3 things”, with an Undo button), the Undo and Redo buttons
say when the step is from a plugin, and when you open SketchCraft after an AI
agent saved changes you’re told. The plugin install preview shows the same
kind (JavaScript or Ruby) and Ruby menu items that the installer uses, and a
plugin that is both is refused. Agents can no longer start programs (animate, IFC and DWG are
yours alone), every helper program has a time limit and is stopped with
everything it started,
-
WildLeopard review of 0.3.6. Your model is safer: it’s saved atomically with rolling backups, a file that can’t be read is kept aside instead of replaced, and a bad command can no longer corrupt it. Plugins (JavaScript and SketchUp Ruby) and AI agents are held to modeling commands, the plugin sandbox is tighter, installing a plugin shows what it is first, MCP agents work inside one folder, and the dev bridge needs a token. Updates and releases are checked more strictly, and releases publish SHA-256 checksums.
-
WildLeopard review of 0.3.6. Undo no longer steps back over work another client (Claude, a second window) saved, and a burst of New/Open can’t push your last good backup out (backups are thinned instead of dropped, blank ones are skipped). A plugin run is now one Undo step. Opening a huge or booby-trapped DXF is refused quickly instead of freezing the app, and very long point lists or absurd stair/array counts are refused. AI agents write only the right kind of file with a new name (never over yours) and can’t be steered out of their folder by an OBJ file. Plugin messages say which plugin they come from, and saved CSVs can’t carry spreadsheet formulas.
-
WildLeopard review of 0.3.6. Backups are safer: only SketchCraft’s own backups are counted, the newest of each time slot is kept, the copy taken just before a New, Open or big delete is kept for a day, and another model in the same folder can’t thin yours. If another program saves while a plugin runs, or while your own save was failing, your changes are set aside in a
.unsaved-file next to the model (with a warning that stays until you deal with it) instead of being lost. A plugin run is never re-pointed at someone else’s model mid-run, and a run that is never closed is saved after a couple of minutes. AI agents can’t write into Backups or Plugins through the library, and can’t replace library or export files that already exist. Huge copies and arrays, dense DXF drawings, text with many outlines and grouping part of a big mesh are bounded or fast instead of freezing the app. The report CSV can’t carry formulas, plugin tool previews can’t crash the window, and a long Ruby script has a time limit. -
WildLeopard review of 0.3.6. Backups can no longer be pushed out: forced backups are paced, your backups, an agent’s and a plugin’s each have their own small quota (with a byte limit too), a plugin run that wipes the model is backed up first, and the files set aside next to your model are only removed with a notice. Folder names such as
BackupſorBACKUP~1can’t reach Backups or Plugins (they are compared by what they are on disk, not by spelling), and a name an agent has made is only “its own” while the file is still exactly what it wrote. A model can hold about 2 million points, edges and faces (was 8 million); a bigger one opens for viewing and cutting down instead of being refused. DXF wall layers and hatches, and 3D text, now stop at their time limit. A plugin run is closed on time even if the app is idle, and your own edits during a run are saved at once. The release workflow keeps the Apple secrets out of the job that compiles, and checks the file names it signs. -
WildLeopard review of 0.3.6. Undo after another program saved now works on ordinary models (it used to refuse most of the time once you had rotated, scaled or imported anything), carries your history across a save without a pause even on huge models, and keeps a step it had to refuse so it can be tried again (press Undo again to skip it). It also refuses an undo that would leave another program’s work pointing at a colour, group or part that the undo removed. Restore no longer reuses part numbers and refuses a damaged backup. Images, photos and scans count against a size limit (256 MB in a model), so a runaway tool can’t make the model unopenable or push your backups out; your own big imports (a 215,000-triangle OBJ, a 354,000-line DXF, a 300 x 300 terrain) work again. Backups keep one copy per hour for a day and per day for a month however many deletes you make, a few huge backups can’t push out all the others, and Restore lists only the set-aside files SketchCraft itself made. Plugins can no longer use Undo and Redo; the release workflow asks the
releasereviewer before the Apple signing secrets can be read. -
WildLeopard review of 0.3.6. One size limit now counts everything in a model (images, scans, names, notes, component attributes): about 512 MB of file, of which an AI agent or a plugin can take a model up to 160 MB, and no more than 32 MB at a time, so a runaway tool can no longer make your model unopenable. Models over the limits (made before this, or restored from a backup) now open for cutting down instead of being refused with a message you can’t act on, and Restore is never blocked by the limit. A model SketchCraft saved always opens again (the open limit is 768 MB). If your model file can’t be read when SketchCraft starts, nothing is saved over it until you restore a copy or start a new model. Opening a file (or a library part) whose part numbers were wrong no longer overwrites your drawing, and components are checked as thoroughly as the model. Huge pictures hidden in a small file are measured before they are opened, library thumbnails check the file size, and a face squashed to nothing can no longer stop the model drawing. Undo no longer lets a few millimetres of another program’s edit be overwritten at survey-sized coordinates, and a Redo step survives a second save by another program. A recovery file whose note was lost is still listed in Restore (“not verified”). AI agents can no longer start the map and terrain download (Add location…); it stays yours. Very large models (over a million points, edges and faces) say so: each change takes a second or more.
-
WildLeopard review of 0.3.6. Models with parts inside parts (most SketchUp imports and library parts) open, restore and reload again: the sixth review’s consistency check wrongly refused them. A model with a very long text pool (hundreds of thousands of named placements) opens for cutting down instead of being refused, and an AI agent can no longer use up the room your own names, notes and colours need. The file-size estimate counts escaped text, so a model SketchCraft saved always reopens. Formulas in Dynamic Components are worked out once each (a long chain no longer hangs the app), and an id counter at the top of its range is refused instead of overwriting your drawing. If SketchCraft can’t read your file at start, saving comes back by itself when the file can be read again or is moved, or when you choose New or Open. An agent’s
openand library reads have their own smaller size limits, and a large import now shows the big-model notice straight away. -
WildLeopard review of 0.3.6. A SketchUp file (or a saved model, or a library part) whose components contain themselves, nest more than 64 levels deep or multiply into millions of faces (a part placed 10 times inside a part placed 10 times, and so on) used to crash the app, and could crash it again on every start. They are now refused with a message, and a saved model like that is set aside like any damaged file instead of crashing the program on launch. Components can’t be made, and SketchUp files can’t be imported, while you are editing a component (close it first); that also fixes a bug where such an import could make a component contain itself. Opening a SketchUp 2021+ file is held to limits (archive size, pictures and time, at most 30 seconds for any file), so a tiny booby-trapped file can’t use up the computer’s memory or freeze the app. A plugin tool that can’t start now says so, and one that sends too many commands is stopped.
-
WildLeopard review of 0.3.6. Double-click now works everywhere (it did nothing in Windows and in browser builds): double-click finishes a wall, opens a group or component, selects a face with its edges (triple-click: everything connected), and repeats your last Push/Pull distance. Escape closes the Learn, Themes, Plugins and every other dialog, and the File and right-click menus. A damaged classic SketchUp file (2020 and earlier) is now refused in well under a second instead of freezing the app for up to 30 seconds. A saved setting that has gone bad can no longer stop the app starting. Placing a component while you are editing one says “Close the component you’re editing first” and leaves Place mode. Another program that opens your model while you are editing a group no longer draws into that group, which could make Undo refuse to take back your own step. File > New while editing a component now really starts a new model. Pictures in a SketchUp file that can’t be read, or are over 64 MB, are named in the import notice.
Changed
- Bigger pictures. Textures and photos may be up to 16,384 px on a side and 100 million pixels (48 MP phone photos and 8K textures are fine; it was 8,192 px and 40 million). A picture that is too large is refused when you add it, with its size in the message, and a picture left out of a render, a SketchUp import or an opened file is named in a message instead of being dropped silently.
Added
- Delete or replace a material. In Materials (Textures): each picture shows its size, Replace picture… puts another image on every face that uses it, Delete takes a material and its picture out of the model (its faces go back to the plain look, or to a material you choose), and Remove unused materials clears out what nothing uses. They are yours only: AI agents and plugins can’t delete materials. This is also how you cut down a model that is over the size limits.
- Restore from backup… (File menu, or Shift+S): the model’s earlier copies,
newest first, with their time, size and what they were taken before (“before New”,
“before a plugin run”). Restore one as a single Undo step (the model it replaces is
backed up first) or save it as a copy beside the model. Work SketchCraft set aside
(
.unsaved-and.damaged-files) is listed there too. - Undo keeps your own history when another program saves. Claude or a second window saving the model no longer wipes your Undo: it takes back your last step and never the other program’s work. If the other program changed or built on the same objects, Undo says so and keeps that step (press Undo again to skip it) instead of guessing. A plugin run is still one step.
- A library of scale figures for paths and streets (Library › Scale
figures): a walker, a shopper with a tote bag, a jogger, a child, a dog
walker, someone pushing a stroller, a wheelchair user and a cyclist, all flat
and always turning to face you, plus a flat car and a flat SUV in profile for
elevations and sections (those stay put; rotate them along the road). Search
“people” to find them all. Scripts can
insertthem by name. - Plugins window (File › Plugins ▸ Manage plugins…, or Shift+S): every plugin with its version and author, turn each on or off, remove yours (moved aside, so it can come back), and Install from file… for a .zip. Installs are checked: safe file names only, plugin files only, size limits.
- Plugin forms.
ctx.ask()shows a form (lengths in the model’s units, numbers, text, choices, checkboxes) and returns the answers; time spent filling it in doesn’t count toward the one-minute limit. - SketchUp Ruby scripts. Many SketchUp extensions that build things run
in SketchCraft: install a
.rbzor.rbfrom the Plugins window and its menu items appear in File › Plugins. Input boxes become forms, lengths are SketchUp’s inches, and what a script builds is undoable. It runs in the same sandbox as other plugins; what isn’t supported yet stops with a clear message. See docs/dev/sketchup-ruby.md. - Plugin tools. A plugin can add an interactive tool: it gets snapped clicks and moves, draws previews, shows its hint, and keeps going until Esc.
- Framing (a built-in example): the Stud wall tool. Click where a wall starts and ends; plates and studs at your spacing (16" on center by default), every board its own group, walls chaining corner to corner.
- Plugin buttons on the tool bar. A plugin command with an icon gets a button, in its own group at the end of the bar; Cut list and Shelves have one.
- More help in the app. Learn has three new lessons (move a single corner, plugins, making it look your way), every lesson can play its demo first, eleven demos to watch (recorded from the app in the Classic look), and Read the guide opens the new user guide.
- A user guide in ten chapters (docs/guide), and developer docs (docs/dev: scripting and every command, MCP, building, architecture).
- Shelves (a built-in example plugin): a shelf unit from width, depth, height and shelf count, every board its own group, ready for Cut list.