SketchCraft
Blog

Plan a bookcase, get a shopping list

Every woodworking project has the same awkward moment: the drawing’s done, and now you’re standing in the lumber aisle doing long division on your phone. SketchCraft’s Cut list plugin does that part for you.

Build the thing

The Shelves plugin asks for the width, depth and height, how many shelves, the board thickness and whether you want a back panel, then builds the bookcase from real boards. Or model your own: the only rule is that each board is its own group or component, so SketchCraft knows where one part ends and the next begins.

Press Cut list

Select some parts (or nothing, for the whole model) and run Cut list…. You get every part to cut, measured from its own faces, so a board turned on its side still reads right. Then the useful bit:

  • Parts up to 40 mm thick and at least 100 mm wide count as sheet goods, and are packed onto 4×8 ft sheets.
  • Everything else is a board, packed onto 8 ft lengths.
  • Both leave room for a 3 mm saw kerf.

So instead of a list of rectangles, you get something like “2 sheets of ¾ in plywood, 3 boards of 1×2, 8 ft long”. It even tells you when a part is bigger than a sheet or longer than a board.

The honest bit

It’s a guide for buying, not a cutting plan: pack your own sheets on the saw, and buy one spare. The plugin is about 120 lines of JavaScript, so if your yard sells 10-foot boards, it’s an easy edit. Here it is.